Welcome to www.chinatrucks.com

Product Presentation

FAW CA3313P7K2T4A+FAWDE Power+FAST Gearbox

Collection Enquire
  • FAW CA3313P7K2T4A+FAWDE Power+FAST Gearbox
Technical Parameter
Product Description






6-cylinder in line, 4-stroke,water-cooled, direct injection, turbocharged, air-to-air intercooled

Rated Power

206kW (280hp) @ 2300rpm

192kW (260hp) @ 2300rpm

Max. Torque

1100N.m @ 1400rpm

1000N.m @ 1400rpm

Bore & Stroke




Compression Ratio


Specific Fuel Consumption


emission rating



Air Compressor

380L/min @ 2300rpm

Lube Oil System

Full flow oil filter, centrifugal oil filter, turbocharger oil filter

  Starting System

Starter: 24V 6kW
Alternator: 28V 1.5kW, with built-in regulator
Cold starting aid: grid-type pre-heater

Air Intake System

Dual paper element air filter with air restriction indicator

  Fuel Supply System

One frame-mounted primary fuel filter and two engine-mounted secondary fuel filters
Fuel Tank Capacity: 386L

Exhaust System

Horizontal muffler with flexible pipe

Cooling System Radiator: tube-type aluminum radiator with coolant recovery tank
Fan: Lightweight plastic with viscous type drive


--Dry single Φ430mm plate
--Diaphragm spring
--Hydraulic control with air assist
--Non-asbestos composite friction material

--Shanxi Fuller 9JS135 mechanical transmission with auxiliary case, 9 forward speeds and 1
   reverse (CA6DL1-28 only)
--Ratios: 1st 12.11, 2nd 8.08, 3rd 5.93, 4th 4.42, 5th 3.36, 6th 2.41, 7th 1.76, 8th 1.32,
   9th 1.00, Rev. 12.66
--Shanxi Fuller 8JS118 mechanical transmission with auxiliary case, 8 forward speeds and 1
   reverse (CA6DL1-26 only)
--Ratios: 1st 11.40, 2nd 7.94, 3rd 5.63, 4th 4.06, 5th 2.81, 6th 1.96, 7th 1.39, 8th 1.00, Rev. 11.35

Front axle
--Drop forged "I" beam, rear mounted tie rod
--Rated axle capacity: 7000 kg
--Integral power steering, tilt and telescopic steering column
--Suspension: Semi-elliptic multi-leaf springs with telescopic double acting shock absorbers
--8.00V-20 steel disc wheels and 11.00-20-16PR tires (Single, bias tube-type)

Rear axle
--Ф457 cast axle, 5.286 ratio, full-floating
--Rated axle capacity: 23000 kg
--Suspension: Balance spring, semi-elliptic multi-leaf
--8.00V-20 steel disc wheels and 11.00-20-16PR tires (Dual, bias tube-type)

--Front and rear dual-circuit independent air brake system with air dryer
--Reservoirs: Four 35L steel reservoirs and one 15L steel reservoir
--Service brakes: Air actuated, drum type, brake drum inner diameter: 400mm
--Brake shoe width: Front 135mm, rear 200mm
--Parking brake: Pneumatically controlled spring brakes, operated by manually actuated
   valve in conjunction with quick release valve, acting on rear wheels
--Exhaust brake: Electrically controlled, pneumatically activated butterfly valve in exhaust pipe

--Ladder type, channel section side rails
--Cross section dimensions: 280×90×8mm (with 5mm inner reinforcement)
--Assembled width: 865mm in the front and rear

--Model J5M all steel welded COE (cab over engine) design, 2-point spring/hydraulic
   suspension, 44 degree hydraulic cab tilt system with safety latch
--Cab glass: Laminated windshield and tempered side & rear windows
--Windshield wipers: 3-blade, electric-driven, 2 speed & intermittent
--Driver seat: Height, position & seat back angle adjustable with helical suspension, cloth
   with head rest
--Passenger seat: Back angle adjustable with helical spring, cloth with high back
--Seat Belts: Driver & passenger, 3-point type
--AM/FM stereo radio with cassette
--Meters & Gauges: Speedometer, tachometer, coolant temperature gauge, air pressure
--Warning Lights & Buzzers: Cab lock warning light & buzzer; Low coolant level warning
   light & buzzer; Low oil pressure warning light & buzzer; Low air pressure warning
   light & buzzer; Parking brake indicator light

--Dump - fully welded, latching tailgate, integral splash guards, cab shield

Electrical system
--24 Volt, negative ground system
--Battery: 6-QAW-180D, capacity: 2×180A.h
--Combination halogen headlamps/marker lamps
--Combination stop, tail and back-up lamps with reflector

Weights (kg)
--Curb weight: 15800
--Front dual axle curb weight: 5950
--Rear dual axle curb weight: 9850
--Load capacity: 20000

Dimensions (mm)
--Overall dimensions (length ×width × height): 10115×2490×2730
--Body inner dimensions (length × width × height): 7200×2300×1400
--Track (front/rear): 1944/1847
--Wheelbase: 1900+3650+1350
--Front overhang: 1375
--Back of cab to tandem axle center: 5285
--Rear axle center to end of frame: 1085

--Top speed: 86km/h
--Fuel consumption at 65km/h with full load: 32L/100km
--Min. turning radius: 10.7m
--Max. outside noise level under acceleration: 84dB(A)
--Min. ground clearance: 245mm

京ICP备09021066号-10Public security record numberPublic security record number:11010502036076